Wikia

Doom Wiki

WAD

Talk21
3,228pages on
this wiki

WAD (which, according to the Doom Bible, is an acrostic for "Where's All the Data?" [1]) is the file format used by Doom and all Doom-engine-based games for storing data. A WAD file consists of a header, a directory, and the data lumps that make up the resources stored within the file. A WAD file can be of two types:

  • IWAD: An "Internal WAD" (or "Initial WAD"), or a core WAD that is loaded automatically (or from a game select menu on source ports) by the engine and generally provides all the data required to run the game.
  • PWAD: A "Patch WAD", or an optional file that replaces data from the IWAD loaded or provides additional data to the engine.

A WAD file can be read and/or edited by many tools, such as WAD editors.

HeaderEdit

A WAD file always starts with a 12-byte header. It contains three values:

wadinfo_t
Position Length Name Description
0x00 4 identification The ASCII characters "IWAD" or "PWAD". Defines whether the WAD is an IWAD or a PWAD.
0x04 4 numlumps An integer specifying the number of lumps in the WAD.
0x08 4 infotableofs An integer holding a pointer to the location of the directory.

All integers are 4 bytes long in x86-style little-endian order. Their values can never exceed 231-1, since Doom reads them as signed ints.

DirectoryEdit

The directory associates names of lumps with the data that belong to them. It consists of a number of entries, each with a length of 16 bytes. The length of the directory is determined by the number given in the WAD header. The structure of each entry is as follows:

filelump_t
Offset Length Name Content
0x00 4 filepos An integer holding a pointer to the start of the lump's data in the file.
0x04 4 size An integer representing the size of the lump in bytes.
0x08 8 name An ASCII string defining the lump's name. Only the characters A-Z (uppercase), 0-9, and [ ] - _ should be used in lump names (an exception has to be made for some of the Arch-Vile sprites, which use "\"). When a string is less than 8 bytes long, it should be null-padded to the tight byte.

Tools should not assume the lump-order in the WAD to be sorted by their byte offset into the WAD.

"Virtual" lumps (such as F_START) only exist in the directory, having a size of 0. Their offset value therefore is nonsensical (often 0).

It is possible for more than one lump to have the same offset value, aswell as having offsets that overlap other lump data.

Type of file is not stated in the lump's data.

Typical wad file:

wadfile_t
Header
Lump Data
Names and pointers of Lumps

Lump orderEdit

The majority of lumps have no restrictions on where they must be located in WAD files, although there are typically some guidelines to make the file easily readable by other people. For certain lumps, however, the location is crucial.

Map data lumpsEdit

A map in Doom is made up of several lumps, each containing specific data required to construct and execute the map. The first lump gives the internal name of the map. In Doom, this had to be in the form ExMy or MAPxx, where x and y could not exceed 4 and 9 respectively (Ultimate Doom), and xx could not exceed 32 (Doom 2/Final Doom). Other than defining the name of the map, the lump is usually empty but can contain data. The DOOM64.WAD file for Doom 64 EX, converted out of the Nintendo 64 ROM content, contains embedded IWADs in MAPxx lumps. In Hexen, they contain version control information; which is not used by the game but was presumably used by Raven Software's editing tools. SMMU introduced using it to store map information and FraggleScript. The level name marks the start of this map. In order to work properly, the following lumps must follow immediately after the the level name:

  • THINGS: A lump listing all the Things present in this map: their X and Y coordinates, starting angles, type and flags. In the Hexen map format, this lump also contains information on Z-height and a thing's TID, special, and arguments. As with all of these lumps, this list will be generated by your level editor and should generally be left alone.
  • LINEDEFS: A list of linedefs, defined by their starting and ending vertices, flags, type, tag, args, and front and back sidedefs (if any). Note: The standard Doom format does not contain args.
  • SIDEDEFS: A list of the sidedefs that are linked to the linedefs. These contain the data for what textures appear where on the side of each line, their X and Y offsets, and what sector this side of the linedef belongs to.
  • VERTEXES: A list of each vertex in the map, using X and Y coordinates.
  • SEGS: A list of line segments called "segs" that connect to form subsectors. Created by a node builder.
  • SSECTORS: A list of subsectors, created by a node builder.
  • NODES: The node tree which Doom uses to speed up the rendering process. Similar to a vismap in modern 3D games (such as Quake 3). Created by a node builder.
  • SECTORS: Defines the floor and ceiling heights and textures, as well as light value, tag, and type of each sector in your map.
  • REJECT: Optionally compiled by the node builder, this lump contains data about which sectors are visible from which other sectors. Originally, Doom used this to optimize the game speed by skipping AI routines for enemies whose target was in a rejected sector. Some modern source ports do not require this lump any more; ZDoom for example has been designed to work even without this lump present. For compatibility purposes, an empty (0-filled) REJECT lump should be included if nothing else. The REJECT lump can also be used to create certain special effects (sectors into which enemies cannot see, for example) if modified carefully.
  • BLOCKMAP: Collision-detection information which determines whether objects in a map are touching.
  • BEHAVIOR: Not originally a part of Doom, the BEHAVIOR lump was first used in Hexen and contains the compiled scripts that this map will use. Vanilla Doom and other ports designed for Doom only will crash when this lump is present because Hexen format levels are not compatible with Doom format levels. This lump must be present for Hexen format levels since it is the only way to tell if a map is in Hexen or Doom format.

NotesEdit

The Doom alphas and had noticeably different map formats.

  • In alpha 0.1, there is only one map, which is defined by a series of lumps named M_AREAS, M_FNAMES, M_LINES, M_PLANES, M_PNAMES, M_POINTS, M_TEXTUR and M_THINGS.
  • From alpha 0.4 to the beta, maps had to be within M_START and M_END markers.
  • In alpha 0.4 and 0.5, a map's lumps are as such: map header, FLATNAME, POINTS, LINES, SECTORS, THINGS.
  • With the press-release beta, the map lumps had nearly acquired their definitive names and formats, but the REJECT lump was not introduced yet.
  • Valve's Half-life, and Id Software's Quake 1 & 2 also use formats with the .WAD extension, although in the latter case at least (probably in both cases), it is unlikely that their specs have much (if anything) in common with the Doom .WAD format.

Flats, Sprites, and PatchesEdit

These three resources must be located between special marker lumps so that Doom knows what it is looking at. Other than defining the beginning and end of a graphics section, these lumps contain no data and are 0 bytes long.

The markers consist of names X_START and X_END, where X is the first 1 or 2 letters of the appropriate resource. For example, sprites should be located between S_START and S_END markers. SS_START and SS_END are usually used for user WAD files.

These markers are required by DOOM:

Start marker End marker What Used by
F_START F_END Flat delimiters All versions
S_START S_END Sprite delimiters All versions

These markers are found in the official WAD files, but are unused by known DOOM engines:

Start marker End marker Found in What Used by
P_START P_END Patch delimiters All versions
P1_START P1_END inside P_ range Shareware, Heretic or Hexen patches Doom Shareware and up (but not Final Doom), Heretic, Hexen
P2_START P2_END inside P_ range Registered, Heretic or Hexen patches Doom Registered and up (but not Final Doom), Heretic, Hexen
P3_START P3_END inside P_ range Doom2 patches Doom2, but not Final Doom
F1_START F1_END inside F_ range Shareware, Heretic or Hexen flats Doom Shareware and up (but not Final Doom), Heretic, Hexen
F2_START F2_END inside F_ range Registered, Heretic or Hexen flats Doom Registered and up (but not Final Doom), Heretic, Hexen

Patches are not required to have any markers. Some lump management utilities require P_START and P_END.

MiscellaneousEdit

Some lumps are known by their names and apply to the game as a whole. Some of these are:

Around Wikia's network

Random Wiki